TET, as per customers' requirement, can provide all kinds of technical level solution project of hot rolling strip production line ranged in 450mm, 500mm, 650, and 800mm, etc.

Main Facilities:

TET's traditional hot rolling strip assembly is as semi-continuous mode, consisting of one or two sets of roughing mill and finishing mills, including one or two sets of roughing mills, three sets of vertical edger's, three sets of 2-hi mill and four sets of 4-hi finishing mills.

TET, as requirements of market and customer, have developed new technology of thin slab compact processing continuous casting and continuous rolling (CSP) of medium and narrow strip, the new technology will greatly reduce investment costs under the same capacity, and production cost will also decrease more than RMB 150-200/ton than traditional hot rolling assembly

Slab charging table, Pushing machine, Reheat furnace, Slab discharging table, Descale system, Approach table, 3-hi/2-hi roughing mil,l Roughing mill approach table, Fixed shear, Vertical edger, 2-hi medium mill, 4-hi finishing mill, Electrical looper, Tension reel ,Thin slab continuous caster, Tunnel reheat furnace, Approach table, Descale system, Vertical edger, Furnace coiler, 3-stand 4- hi finishing mil,l Laminar cooling system and Down coiler.

Features of medium and narrow strip CSP:

Right now, most of hot rolling production lines still use traditional rolling process. As CSP technology originated, rolling process became much more compact, investment, facilities ad energy consumption would be decreased, and high yield and quality would be obtained, the production line built up or revamped with S\CSP technology will obviously decrease and increase yield, it is shown in production that CSP technology will decrease production cost of RMB340 per ton compared to traditional rolling process, energy consumption will reduce 50kg equivalent coal in per ton steel, iron oxide quality will obviously improve, and construction period will be shortened. Through decreasing facility investment, the length of production line and facility cost, the more advanced technology will be used in production line in order to promote product quality and competition power in market. 2. The thinner steel strips can be produced.

For example, TET's CSP technology can produce the thinnest hot steel strip of 1.2mm and accomplish the replacement of cold strip with hot strip. 3. The products' varieties and quality made with CSP technology, can satisfy market's requirements, the capacity will reach the range of 500,000 to 1,000,000 tons per year which will be future supply trend. There is a very important signification for CSP technology to save energy, increase yield rate and reduce investment and production cost, CSP technology will be of capacious perspectives.